Here are some C and C++ computer language technical placement test papers written questions and related tech hr interview questions for electronics – communication engineering, computer science – cse, IT branch engineers. More questions for R&D (research and development centre) bangalore recruitment exam papers are available.

How do I write code to get the current drive as well as set the current drive?
Ans: The function getdisk( ) returns the drive number of current drive. The drive number 0 indicates ‘A’ as the current drive, 1 as ‘B’ and so on. The Setdisk( ) function sets the current drive. This function takes one argument which is an integer indicating the drive to be set. Following program demonstrates use of both the functions.
#include
main( )
{
int dno, maxdr ;
dno = getdisk( ) ;
printf ( “\nThe current drive is: %c\n”, 65 + dno
) ;
maxdr = setdisk ( 3 ) ;
dno = getdisk( ) ;
printf ( “\nNow the current drive is: %c\n”, 65 +
dno ) ;
}

The functions memcmp( ) and memicmp( )
The functions memcmp( ) and memicmp( ) compares first n bytes of given two blocks of memory or strings. However, memcmp( ) performs comparison as unsigned chars whereas memicmp( ) performs comparison as chars but ignores case (i.e. upper or lower case). Both the functions return an integer value where 0 indicates that two memory buffers compared are identical. If the value returned is greater than 0 then it indicates that the first buffer is bigger than the second one. The value less than 0 indicate that the first buffer is less than the second buffer. The following code snippet demonstrates use of both
#include
#include
main( )
{
char str1[] = “This string contains some
characters” ;
char str2[] = “this string contains” ;
int result ;
result = memcmp ( str1, str2, strlen ( str2 ) ) ;
printf ( “\nResult after comapring buffer using
memcmp( )” ) ;
show ( result ) ;
result = memicmp ( str1, str2, strlen ( str2 ) ) ;
printf ( “\nResult after comapring buffer using
memicmp( )” ) ;
show ( result ) ;
}
show ( int r )
{
if ( r == 0 )
printf ( “\nThe buffer str1 and str2 hold
identical data” ) ;
if ( r > 0 )
printf ( “\nThe buffer str1 is bigger than buffer
str2″ ) ;
if ( r < 0 )
printf ( “\nThe buffer str1 is less than buffer
str2″ ) ;
}

How do I write code to find an amount of free disk space available on current drive?
Ans: Use getdfree( ) function as shown in follow code.
#include
#include
#include
#include
main( )
{
int dr ; struct dfree disk ;
long freesp ;
dr = getdisk( ) ;
getdfree ( dr + 1 , &disk ) ;
if ( disk.df_sclus == 0xFFFF )
{
printf ( “\ngetdfree( ) function failed\n”);
exit ( 1 ) ;
}
freesp = ( long ) disk.df_avail
* ( long ) disk.df_bsec
* ( long ) disk.df_sclus ;
printf ( “\nThe current drive %c: has %ld bytes
available as free space\n”, ‘A’ + dr, freesp ) ;
}

Use of array indices…
If we wish to store a character in a char variable ch and the character to be stored depends on the value of another variable say color (of type int), then the code would be as shown below:
switch ( color )
{
case 0 :
ch = ‘R’ ;
break ;
case 1 :
ch = ‘G’ ;
break ;
case 2 :
ch = ‘B’ ;
break ;
}
In place of switch-case we can make use of the value in color as an index for a character array. How to do this is shown in following code snippet.
char *str = “RGB’ ;
char ch ;
int color ;
// code
ch = str[ color ] ;

Function atexit( ) recevies parameter as the address of function of the type void fun ( void ). The function whose address is passed to atexit( ) gets called before the termination of program. If atexit( ) is called for more than one function then the functions are called in “first in last out” order. You can verify that from the output.
#include
#include
void fun1( )
{
printf(“Inside fun1\n”);
}
void fun2( )
{
printf(“Inside fun2\n”);
}
main( )
{
atexit ( fun1 ) ;
/* some code */
atexit ( fun2 ) ;
printf ( “This is the last statement of
program?\n” );
}