Subscribe Feed (RSS)Here are the Instrumentation Engineering Questions For Sony India Placement Paper Held on 17th August, 2008
B.tech Instrumentation Engineering Technical Written Test Questions:
Which is the largest layer of the PIN diode?
Find the value of the open loop transfer function (Linear Control Systems LCS Question)
Open loop transfer function of G(s) = 3 (s+2)/s2(s+4)
Lasers:
He-Ne laser is a _____ level system
Guided mode, Where does the normalized propagation lie?
Pipeline improves the CPU performance in ________
When is a real valued signal X(n) called symmetric.
What are the conditions for a signal to be periodic?
(Many of these are Fill in the blanks type questions)
Two Questions about Feedback Relay and Belt Weighting System are there.
What does a machine cycle refer to ?
Many questions are asked about the subject Microprocessors.
Ilegal 8086 instruction
PSW Register of 8085 microprocessor
Reset Signal of 8085 microprocessor
Tell about CMP instruction in the 8085 microprocessor
How much RAM do we have on an 8051 chip?
A 2–port network is reciprocal if and only if ______
Where is a charge amplifier used?
What is the quality factor of the parallel LR circuit ______
Fast process likes flow control in _______
What will be the impulse resonse of a system which as a single pole at origion?
What is the settling time of a second order system
Find out the transfer function of 1000/(1+0.1s) (1+0.01s) _______
What do you mean by a Transfer function?
Question about CRO (cathode ray oscilloscope) and Transducers were asked. Study these topics.
Software linearization is the best for ?
Also see the Sony India Placement Paper May 2008 at Bangalore. There are various other b.tech engineering degree and diploma branches placement papers like electronics and communication ece, mechanical, electrical, production, it, computer science, etc. You can study all our sample placement papers and other question papers free. Good Luck for your exam.
You can leave a comment below.
