Subscribe RSS

Archive for the ‘Technical Interview Questions’ Category

Power Semiconductors and Transistors – Sample Practice Questions

September 11th, 2009 by Admin | 1 Comment | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Power Semiconductor Diodes and Transistors Sample Electrical Engineering Job Questions, Practice Questions on Power Semiconductor Diodes and Transistors, Job Interview Questions and Written Test Questions:
What is a diode?
What are Schottky diodes?
P-N Junction Diodes
What are the Characteristics of diodes? VI Characteristics
Explain the Storage Charge, Rate of change of Current of Diodes, Cut in Voltage.
Various Types of [...]

Diode Circuits & Rectifiers – Sample Practice Questions

September 11th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Diode Circuits and Rectifiers Sample Electrical Engineering Job Questions, Practice Questions on Diode Circuit and Rectifier, Job Interview Questions, Written Test Questions:
Explain Diode Circuits.
What are Freewheeling Diodes?
L Circuit.
What is Trapped Energy?
Diode Rectifier – Single Phase – Half Wave rectifier.
What is Zener Diode?
Numericals about calculation of Diode conduction time, diode peak current, steady state voltage across [...]

Inverters – Sample Practice Questions

September 10th, 2009 by Admin | 1 Comment | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Inverters Sample Electrical Engineering Job Questions, Practice Questions on Inverters, Job Interview Questions, Written Test Questions:
What is the operating principle of single phase voltage source inverters?
What are force commutated thyristor inverters and their types?
Various types are

Modified Mc Murray half bridge inverter
Modified Mc Murray Full bridge inverter
Modified Mc Murray Bedford Half bridge inverter
Modified Mc Murray Bedford [...]

AC Voltage Controllers – Sample Practice Questions

September 10th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

AC Voltage Controllers  Sample Electrical Engineering Job Questions, Practice Questions on AC Voltage Controller, Job Interview Questions, AC Voltage Controllers Written Test Questions:
What is an ac voltage controller?
Various types of ac voltage controllers
Various industrial applications
Principle of burst firing control for a single phase ac voltage controller
Draw:
Waveforms of source voltage, gating signals, Output voltage, source and [...]

Choppers – Sample Practice Questions

September 9th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Choppers Sample Electrical Engineering Job Questions, Practice Questions on Chopper Circuits, Job Interview Questions, Choppers Written Test Questions:
What is the principle of operation of a DC Chopper?
Explain the two important control strategies of chopper operation – constant frequency system and variable frequency system.
What are step up choppers? What is its principle?
Expression for average O/P voltage [...]

Cycloconverters Sample Practice Questions

September 9th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Cycloconverters Sample Electrical Engineering Job Questions, Practice Questions on Cycloconverters, Job Interview Questions, Cyclo Converter Written Test Questions:
What are CCs?
What is the principle of cycloconverter operation?
Explain the following:
Single phase to single phase circuit step up cycloconverter – Mid point CC & Bridge point CC
Single Phase to single phase circuit step down cycloconverter – Mid point [...]

Electric Drives Sample Practice Questions

September 9th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Electric Drives Sample Electrical Engineering Job Questions, Practice Questions on Electric Drives, Job Interview Questions, Electric Drive Written Test Questions:
Explain the Concept of Electric Drives.
What are single phase DC Drives?
Three phase DC Drives.
Explain the Chopper Drives, AC Drives, Induction Motor Drives,
Synchronous Motor Drives
Method for speed control of DC Motors
Characteristics of a motor with constant torque [...]

Thyristors – Sample Questions

September 8th, 2009 by Admin | No Comments | Filed in Electrical Job Interview Questions, Interview Questions, Technical Interview Questions

Thyristors Sample Electrical Engineering Job Questions, Practice Questions on Thyristors, Job Interview Questions, Thyristors Written Test Questions:
What is a thyristor? Which is the most popular thristor?
What are the different modes of operation of a thyristor. VI Characterisitcs
What is its circuit symbol. Switching Characteristics of Thyristor.
What is SCR, Draw its VI & Switching Characteristics
How to turn [...]

SAP ABAP Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in Interview Questions, SAP Interview Questions, Technical Interview Questions

Here are the SAP ABAP Interview Questions for SAP Job Tests held by various SAP service providers and product support multinational companies:
How can we obtain column count of a report?
Explain the difference between customer exits and user exits.
List the user-exits.
How does ST05 help tune the performance?
Explain the difference between interactive and simple reports.
Explain the difference [...]

SAP Product Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in SAP Interview Questions, Technical Interview Questions

Product Interview Questions for SAP Job Tests:
Does it support Linux platform in the frontend?
Is customer support provided when a person uses 3rd party software or recompiles Linux kernel?
Is the price of MySAP Business Suite on Linux changed?

SAP CRM Interview Questions
What do you understand by CRM?
What do you mean by Business Process Management – BPM?
Explain [...]

SAP Netweaver Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in SAP Interview Questions, Technical Interview Questions

Here are some SAP Netweaver Interview Questions:

Describe the difference betwen Standalone Enqueue Server and Enqueue Server.
What do you mean by SPOF?
Explain the ASCS/SCS.
Explain the difference between HA for Java and HA for ABAP.
How is an invoice different from Open Payables?
Why is an active passive cluster configuration used in SAP?
What do you understand by Virtualization?
Define a [...]

SAP BASIS Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in SAP Interview Questions, Technical Interview Questions

Here are the Mostly Asked SAP BASIS Interview Questions:
What do you know about Default user DDIC?
How can we see system logs os SAP at OS level?
How can users be transported between different clients?
Which java tools can be used for installation of Java patches?
Describe the various types of transport request.
What do you know about current kernel [...]

Backup and Recovery Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Backup and Recovery Interview Questions for Oracle Job Test.Sample practice test questions about backup and recovery:
Explain partial backup.
Difference between partial backup and full backup.
Describe full backup.
How does database shutdown take place?
How does database startup take place?
Describe the various steps in Instance Recovery.
What do you mean by On-line Redo Log?
What do you mean by Archived Redo [...]

SQL Plus Interview Questions

August 20th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

SQL Plus Interview Questions from Various Oracle Job Tests

What do you understand by Connect by Prior?
What is the difference between Sorting and Grouping?
What do you understand by a sub query?
Explain Referential Integrity.
What is the difference between subquery and join?
Explain the various types of SQL.
Describe the uses of SAVEPOINTS.
What do you mean by Correlated sub query?
What [...]

SQL In Oracle Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Special Interview Questions about use of SQL In Oracle:
These sql in oracle interview questions or oracle job practice test questions have been asked in various tech interviews and written exams.
Is it possible to assign the default value to actual parameters?
How can we display the number value in words?
State the difference between Truncate and Delete
List the [...]

Scenarios Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Oracle Scenarios Interview Questions:
What do you understand by Testing Scenario?
What do you mean by bulk SQL?
What do you know about dual table? How is data stored in dual table?
Why do we get error if we execute Select sysdate from EMP?Which of the
inner or outer layer will you check first for NOT_FOUND and other errors during [...]

Programmatic Constructs Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Job Interview Questions about Programmatic Constructs for Oracle Database Admin Job:
What do you understand by a Procedure?
What do you mean by a package?
List the various benefits of packages.
What is the purpose of Database Trigger?
Explain the various differences between Integrity Constraints and Database Trigger.
How are procedures and functions different from each other?
What do you mean by [...]

PL-SQL Interview Questions

August 19th, 2009 by Admin | 4 Comments | Filed in Oracle, Technical Interview Questions

Here are the PL-SQL Interview Questions and Sample Practice Questions For Oracle Database Job Test preparation:
Where is the WHERE CURRENT OF clause required in cursors?
Where do we store the features of package, procedure and functions?
Discuss the cursor attributes available in pl/sql.
Explain forward declaration used in functions.
If we call a column updating procedure in the database [...]

Oracle Forms 4.0 Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Various Oracle Forms 4.0 Interview Questions, Sample Practice Questions for Oracle Job Tests:

Explain the various kinds of items.
What triggers are related to radio group?
Can we vary the default value of radio button during run time?
Explain the Layout Editor.Is it possible to combine an alert to a field?
Describe the various types of canvas-views.
Describe the windows event [...]

Oracle Forms 3.0 Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Here is a collection of Technical Job Interview Questions on “Oracle Forms 3.0″
Explain the points of difference between ON-VALIDATE-FIELD trigger and POST-CHANGE Trigger.
Describe the points of difference betweeen a trigger and ON-VALIDATE-FIELD trigger.
Describe the points of difference between a POST-CHANGE trigger and POST-FIELD trigger.
What is the purpose of ERASE package procedure?
When do we use teh [...]

Oracle Backup and Recovery Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Oracle Backup and Recovery Interview Questions for Oracle MNC Job Tests held worldwide
Explain the difference between recovering and restoration of a database.
Explain the points of difference between crash recovery and media recovery.
What is Media Recovery?
What do you understand by Restricted Mode of Instance Startup?
Explain the various steps in disk migration?
What do you mean by disk [...]

Oracle Architecture Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Here are some interview questions on Oracle Architecture:
Explain the difference between BITMAP Index and BTREE Index.
Explain the various large object types in Oracle
Explain the points of difference between snapshot and materialized view.
These were just a few. Watch out for more. See all questions under the Oracle Category.

ONT Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Here are the Oracle ONT Interview Questions For Database Administrator Job Tests:
What do you mean by Order Management Flow?
Define PTO
What is ATO?
Where is PTO and ATO used?
What is the difference between ATO and PTO?
See All Technical Interview Questions, Oracle, Oracle Apps and Oracle Placement Test Papers.

Memory Management Interview Questions about Oracle Database

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Oracle Memory Management Interview Questions
How does the System table space work?
What is the purpose of ROWS option in IMP command?
Why is Inctype option important in EXP Command?
Explain the function of Record Length optionn in exp command.
Explain the function of Tables option in exp command.
What is the function of INDEXES option in IMP command?
How does the [...]

General Oracle – Basic Job Interview Questions Collection

August 19th, 2009 by Admin | No Comments | Filed in Interview Questions, Oracle, Technical Interview Questions

General Oracle Interview Questions – Some Basic Job Conceptual Questions – Biggest Collection
Explain the points of difference between DBMS and RDBMS.
Is it possible to have two or more canvas views attached with a window?
List the various Built-ins used to send parameters to forms.
What happens if there is failure of report execution?
When is the After report [...]

Distributed Processing Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

These are the Distributed Processing Interview Questions For Oracle Job Test.
Sample Practice Questions for Oracle Job Tests
What are the advantages of using distributed options in oracle databases?
What do you mean by snapshot log?
What is the meaning of dynamic data replication?
What do you mean by snapshots?
How to decrease the network traffic?
What is SQL * NET?
Various steps [...]

Database Security Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Sample Database Security Interview Questions For Oracle Technology Job Test

Explain the Various levels of auditing.
What is the function of Analyze command?
How do we determine the Archived log file format and destination of file?
Explain the method to enable automatic archiving.
Explain roles and their implementation.
What do you understand by a trace file? How do we make a [...]

Database Administration Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Sample Database Administration Interview Questions and Practice Test Questions for Oracle Database Administrator’s Job Test and Technical Interviews
What do you understand by a deadlock.
Explain a database instance.
Is it possible to reduce the Datafile size?
Where do we use lookup table?
What are the contents of a control file?
When a user is created in DBA, which datafile has [...]

OOPS Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Here are some Basic OOPS Interview Questions – Useful for various jobs.
Describe the principle of inheritance.
What are the various forms of polymorphism.
Describe the principle of Polymorphism.
What is the use of function overloading?
What do you understand by OOPS?
What are the various principles of OOPS?
Describe the Principle of Encapsulation.
Is it possible to inherit the private members of [...]

OLAP Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

OLAP Interview Questions about Oracle job test:
What do you understand by Online Analytical Processing?
What is the difference between Data Warehouse Database and OLTP database?
Explain the difference between Online Analytical Processing and Data Warehouse
Explain the difference between OLAP tool and ETL Tool.
Different types of ETL available?
Various types of OLAP Tools.
How can we build a report in [...]

Data Structures Interview Questions – Oracle

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Here are the Oracle Data Structures Interview Questions asked in oracle database administrator job test.
Oracle Data Structures Interview Questions:
Can a pointer be considered a variable?
What is the symbol *?
How do we find a loop in linklist?
How can we insert a node in the middle of a linked list?
What do you understand by precision?
What is the [...]

Data Modeling Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle, Technical Interview Questions

Given below are some important Data Modeling Interview Questions
What do you mean by First Normal Form?
What do you know about Second Normal form?
Where do we use the Articial Primary Key?
What is third normal form?
What do you mean by ERD?
Explain the difference betwen snow flake schema and start flake schema
Should we store all databases in third [...]

AOL Interview Questions – Oracle Apps Test

August 19th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are the AOL Interview Questions for Oracle Apps Job Exam.
How can we determine the name of a form?
What is the importance of Hierarchial and non Hierarchial security type in value set?
Where can we find the output files and concurrent request logfiles?
Explain the points of difference between master organization id and organization id?
How to determine [...]

AR Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

AR Interview Questions for Oracle Apps Job Test
List the various new features in Release 11i.
Explain the points of difference between +aa, +vl, +v tables in Oracle applications
What do you mean by MRC and why is it used?
Explain the difference between interfaces and conversions.
What do you understand by FSG?
What is the use of FSG?
What is the [...]

Scope and Application Interview Questions

August 19th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are the Scope and Application Interview Questions for Oracle Apps Job Tests.
Is it possible to make a post to parent account?
What happens when we enter the query ’select * from po_headers’?
Explain the difference between oracle application version 11.5.7 and 11.5.10
What do you understand by ‘Unfreezing Rollup Groups’?
How can we use a single application to [...]

Oracle Forms Interview Questions

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are the Oracle Forms Interview Questions for Oracle Database Administrator Job Tests.
Which directory has the FORMS source codes?
How can you register a custom application?
Why is it required to build packages and not procedures / functions?
Why do we need custom library?
What do you know about template form?
Do we have to delete exiting triggers?
Which triggers should [...]

Oracle Apps Basics Interview Questions

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are some Basic Oracle Apps Interview Questions & Oracle Apps Practice Tests Basics:
Explain the points of difference between organisation_id and org_id.
What do you understand by one full life cycle implementation.
Describe the various steps of form customization.
Method of implementation of Flex fields in forms.
Explain the set ups needed for approval of AP invoice. How do [...]

ONT Interview Questions

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are a few ONT Oracle Apps Interview Questions
Explain the interface table and base table.
Explain the various validations.
Explain the process of PO requisition interface.
See more Oracle Apps Interview Questions and Technical Interview Questions Here.

Flexfields Interview Questions & Answers

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions, Uncategorized

Here are the Flex fields Job Interview Questions:
Is it possible to enable or disable a whole DFF?
How can we have segments in a flexfield compulsory?
Why do we need a flexfield qualifier? Why is it required even if we can get a unique name for a segment?
Can we enable or disable selected fields of DFF?
What is [...]

GL Interview Questions

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are some GL Interview Questions about Oracle Apps
Explain the method to disable budgetary control for a set of books?
Describe the recurring invoices.
Steps for integration of AP or AR to GL.
Explain the MD form 50.
Can we set up interest rates separately for various suppliers in payables module?
What do you know about Multi-org and MRC?
Explain the [...]

D2K Interview Questions

August 18th, 2009 by Admin | No Comments | Filed in Oracle Apps Interview Questions, Technical Interview Questions

Here are the Important D2K Technical Job Interview Questions
Explain the method to debug errors in an oracle application.
What do you know about value sets based on table.
Have you ever worked on data conversion?
How can you put an image to report from a database?
How will you run ms_batch file in forms?
Why do we need object libraries?
Why [...]

Hardware and Software Design Interview Questions

July 23rd, 2009 by Admin | 1 Comment | Filed in Technical Interview Questions

You need to have your concepts clear if you have to succeed in such an interview. In the technical part, there are various types of questions as given below.
Hardware and Software Design Interview:
Do you think DOS is a real time OS?
Which data structure can be used for storage of processes information into a real time [...]

Computer Architecture (CA) and Design Interview Questions

July 23rd, 2009 by Admin | No Comments | Filed in Technical Interview Questions

If you are preparing for the Computer Architecture (CA) and design interview, you should be aware of these mostly asked ca technical interview questions and important written test topics also useful for placement papers. Study the practice questions and leave your feedback below.
Computer Architecture and Design Interview Questions
What do you understand by Virtual Memory and [...]

A+ – Basic PC Interview Questions – Important for A+ Technical Interviews

July 22nd, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important questions related to A+ asked in various technical job interviews, written exams and placement papers for various multinational companies.
A+ and Basic PC Interview Questions:
Explain the difference between original and chip set motherboard.
Explain the difference between L1 and L2 cache.
How does the browser go from a domain to an IP address?
How is [...]

8086 Interview Questions – All they ask in 8086 Technical Interviews

July 21st, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are the important questions related to 8086 asked in various technical job interviews, written exams and placement papers.

8086 Interview Questions:
Which registers handle the logic calculations?
Various flags in 8086.
When do we use Masked Interrupts?
Define non masked interrupts.
Different types of connections established by Bluetooth?
Explain the different types of interrupts used in 8086.
What can be find the [...]

XSL – FO Interview Questions

July 20th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Some basic questions about XSL- FO are often asked in the technical interviews for various companies’ exams. You should know what basic questions are asked and prepare them. There is not much work involved and spending just a few minutes to learn these will help you a great deal in answering all the xsl fo [...]

Xquery Interview Questions – Important for Xquery Technical Interviews

July 19th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Xquery Technical Interviews – Prepare for Xquery job technical interview with these questions. Also useful for written exams and placement papers.
How are terms defined in xquery?
What do you understand by XQuery?
What are syntax rules of xquery?
How are various conditional operations performed?
Various difficulties in xquery.
How are comparisons made?
Definition of functions in xquery.
Definition of atomic values.
How do [...]

x86 Interview Questions – Preparation Resources for x86 Technical Interviews

July 19th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

x86 Technical Interview Questions:
What do you understand by cache memory?
Define the Latch.
What is an interrupt?
Explain the difference between RAM and ROM.
What do you mean by a compiler?
How will you design a FSM for a vending machine.
On what factors does the speed of a microprocessor depend?
What is HCMOS?
What are the demerits of microprocessor?
Give an example for [...]

Hardware Design Interview Questions – Samples for Hardware Design Technical Interviews

July 18th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are the mostly asked sample technical interview questions for hardware design interviews. These are also relevant to written exam papers and placement papers about hardware designing.
What is the significance of set up time and hold time?
A circuit is provided to you and you have to draw the exact timing response for it.
How can you [...]

Embedded Systems Interview Questions – Important For Embedded Systems Technical Interviews

July 18th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Important questions for embedded systems technical interviews for electronics engineers, chip designers and for diverse topics related to embedded field are given below. These are useful as sample practice tests and for preparation for placement papers and written exams of various multinational companies dealing in embedded systems design.
Embedded Systems Sample Interview Questions:
What do you know [...]

Intel Interview Questions – All they ask in Intel Technical Interviews

July 18th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Lots of detailed Technical Interview Questions about Intel. Various sample practice questions about Intel technical interviews are shown. Also applicable for written microprocessor exams for companies like Intel and placement papers.
What is meant by snooping? What do you understand by snooping?
Experience about full chip clock and power distribution part. Explain about your experience and projects [...]

Xpointer Interview Questions – Important for Xpointer Technical Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Some basic yet important questions about xpointer technical interview and written test questions.
What do you mean by Xpointer?
How is it used?
What do you understand by server-side xpointer?
Describe the xpointer resources.
How is an xpointer processor configured?
What is the syntax of xpointer?
Implementation of an application specific xpointer scheme.
How to integrate xpointer into an application?

Xpath Interview Questions – Important Xpath Technical Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Basic questions about xpath asked in technical interviews and written placement papers.
What do you know about Xpath?
How are the Xpath Axes defined?
What do you mean by Atomic values?
How to define nodes in xpath?
What kind of functions are used in xpath?
gWhat is the relationship between the nodes?
How are nodes defined in xpath?

Xlink Interview Questions – All they ask in Xlink Technical Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Important questions asked in xlink job technical interviews and written exam placement papers.
Explain the difference between xml and xlink.
What do you understand by xlink.
Give the syntax of xlink.
Explain the use of xlinks modularization.
How are drop down combos made in xlink?
How to create a good looking table on xlink and prodigy?
Why a document must have correct [...]

Xforms Technical Interview Questions – All they ask in Xforms Job Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important interview questions asked in xforms job interviews and practice test questions for xforms written exam.
What do you understand by XForms?
How are data types defined in xforms?
How is selection control performed?
How are controls defined?
What do you understand by Binding in Xforms?
How is Namespace defined?
Describe the Xforms Processor.
How can you define the Xforms [...]

WSDL Technical Interview Questions

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are a few sample WSDL technical interview questions. Sample practice questions for written test and placement papers.
What do you understand by WSDL?
How is binding defined in WSDL?
How is a WSDL document defined?
What do you understand by disco file?
What is the use of binding element?
Why is the <portType> element used?
What do WSDL stand for?
Which directory [...]

Schema Technical Interview Questions – All they ask in Schema Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Important Questions for XML Schema. These are useful for schema written placement tests, exam papers and job technical interviews for web designers, programmers and IT persons.
How can we set the fixed and default values for attributes?
What do you understand by XLM Schema?
What is the benefit of using XML Schemas?
How are attributes defined in xml schema?
Describe [...]

RSS Sample Technical Interview Questions

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Important questions related to RSS technical interviews.
What is the use of RSS reader?
What do you know about the history of RSS?
What do you mean by automated RSS?
Use of pubDate, source and title element in RSS?
Use of enclosure element in RSS.
How is the comments element used in RSS?
Use of item element
How do we define the author [...]

RDF Sample Technical Interview Questions – All they ask in RDF Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Important Questions for RDF Technical Interviews and Written tests in job placement papers
What is the difference between OWL and RDF?
Reason for using OWL?
What do you mean by ontology in OWL (Web Ontology Language) ?
What do you understand by OWL?
Is owl a web standard?
Explain the RDF schema.
Where is RDF used?
Explain the various rdf rules.
Describe the rdf [...]

E4X Sample Technical Interview Questions – All they ask in E4X Job Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

How is E4x used with XML?
Is E4X Compatible with major browsers?
How can we use E4X to make XML easier?
What do you understand by E4X?
What do you know about ECMA?
Is there any difference between Javascript and ECMAScript?
Can a XML document be defined as a javascript object using E4X?
How can it be used in Mozilla / Firefox [...]

DTD Technical Interview Questions – All they ask in DTD Job Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important sample questions asked in DTD Technical Interviews. Keep watching here for updates and more questions.
What do you understand by DTD?
Why do we use DTD?
How is DTD declared?
What are the main advantages of using DTD?
Can XML namespaces be used in DTD?
How to write DTD?

SOAP Technical Interview Questions – All They Ask in SOAP Interviews

July 16th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important SOAP Sample interview questions for placement papers and latest important questions for written tests or interviews.
What do you know about HTTP Binding in SOAP?
How is SOAP-DSIG and SSL used for non-repudiation?
What information does the SOAP Header contain?
Explain the difference between fault and exception in Apache SOAP.
How do we create a SOAP [...]

Test Automation Interview Questions – All that they ask in Test Automation Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are the important questions asked in Test Automation Technical Interview.
What part of testing would you automate for a project?
What are major difficulties in test automation.
Give examples of testing tools used during the software development life cycle.
Discuss the important attributes of test automation.
Advantages of test automation.
Discuss some problems you have had with automatic testing tools.
Which [...]

Test Directory Sample Technical Interview Questions

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important technical interview questions for Test Directory. These are the important oral and written testdirectory exam sample questions.
What do you understand by Test Lab?
How can we map the defects directly to our needs?
How to use test director to run reports?
How can test cases be uploaded to test director from an excel sheet?
Can [...]

Loadrunner Technical Interview Questions – All that they ask in Loadrunner Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some important Load Runner Sample interview questions for technical, oral and written loadrunner testing job interviews.
Name some components you have utilized in load runner.
How do we perform regression testing in loadrunner?
What do you understand by HTTP Protocols?
What are the different goal oriented scenarios used in Loadrunner?
What are the different database check points?
Concept of [...]

CISCO – Digital Electronics Technical Interview Questions

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some CISCO Interview Questions consisting more of Digital Electronics written and technical interview Questions asked in leading electronics companies / software development or chip designing firms.
Why do we use refresh in dynamic RAM?
Explain the cause and effect signals of 8085 microprocessor.
What is FILO?
Why is CMOS preferred over NMOS?
What happens if we add negative [...]

Delphi Technical Interview Questions – All that they ask in Delphi Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Delphi Important Technical Interview Questions and sample written recruitment exam questions for programming or software development job for engineers and techies.
What do you know about Delphi?
Have you tried building an application with Delphi?
How do we handle INI files here?
How do we build UDL files?
What is the difference between application server and other servers?
What do you [...]

Telecom – Telecommunications Technical Interview Questions – All that they ask in Telecom Job Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

View Telecom – Telecommunications sample technical interview questions with answers for ECE electronics and communication engineering job interview or written placement test.
Which software is used by a PC to pretend as a computer terminal?
Explain the kind of signaling used between two exchanges.
Which frequency is used to sample VOICE?
What is the biggest decimal number accomodated in [...]

Perl Language Technical Interview Questions – All that they ask in Perl Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample Technical Interview Questions for Perl Language programming, software development job recruitment exam or written Perl language placement test.
How can you use the CPAN to install a perl module.
Perl script to rename datastage jobs
Explain the difference between object oriented and structure oriented programming.
Explain the significance of symbolic reference in PERL.
Explain the symbol table and its [...]

General Java Servlet Technical Interview Questions – All that they ask in Java Servlet Interviews

July 13th, 2009 by Admin | 1 Comment | Filed in Technical Interview Questions

Important JAVA Servlet General Technical Interview Questions, Important Java Servlet Problems and questions for java engineering or software programming written job recruitment exams.
Define a servlet.
What do you understand by JSP attributes?
Why do we require super.init(config) in servlets?
How can we know whether we need jsp or servlet in a project?
Define the servlet interface.
Points of difference between [...]

ABAP Technical Interview Questions – All they ask in ABAP Interviews

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample ABAP Technical Interview Questions, answers and important ABAP Written test or job recruitment exam questions / practice tests.
Describe the ABAP data dictionary.
Define the terms Master Data, Transaction Data, Organization data and System data.
Describe indexes.
Explain the difference between transparent tables and pooled tables.
What do you know about ABAP/4 Query Tool
What is meant [...]

XSL Sample Technical Interview Questions

July 13th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some XSL Technical Interview Questions and important test questions from xsl / automated testing interview or written recruitment exam.
What are the benefits of automated testing over the manual testing?
How do we handle the run time data in QTP?
How do we handle the parameterization in QTP?
Describe the test fusion report of QTP?
What techniques can [...]

VLSI Technical Interview Questions – All they ask in VLSI Job Interviews

July 12th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

VLSI Interview Questions, VLSI Questions for ECE / Electronics / Nanotechnology / Chip designing technical interview for Electronics engineer job recruitment written test or tech interview.
Describe the working of a MOSFET.
What is the sizing of an inverter?
What are the different capacitances in a MOSFET. What is their significance?
Draw the circuit design of a CMOS Inverter. [...]

VBA Sample Technical Interview Questions

July 12th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample VBA Technical Interview Questions and Answers for fresher job interview / placement test. CSE / IT Practice Questions related to VBA asked in written recruitment exams and interviews.
What is the difference between flexgrid control and dbgrid control.
Which control is used to call the windows application.
What do you understand by constructors and destructors.
What are the [...]

XHTML Designing Technical Interview Questions

July 12th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

XHTML Web Designing Technical Interview Questions, XHTML web design job recruitment exam questions, practice test and important written questions.
How is Modularization an important part of XHMTL?
What is the importance of XSLT?
Use of elements like <IMG> and <hr> in xhtml?
How can we code a simple page with XHTML?
What is the importance of modular DTDs?
What is the [...]

RF and Radio Engineering Sample Technical Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample RF and Radio Engineering Technical Interview Questions and Answers for fresher job interview / placement test. Electrical / Communications / Electronics Engineers Practice Questions related to rf and radio asked in written recruitment exams and interview for telecom, telecommunications, mobile network companies.
Define the noise figure.
What do you mean by VCO.
How is dB related to [...]

PHP Language Coder Sample Technical Interview Questions and Practice Test Questions

June 30th, 2009 by Admin | 1 Comment | Filed in Technical Interview Questions

Sample PHP Programming Technical Interview Questions and Answers for fresher job interview / placement test. PHP Programmer job Practice Questions related to php language asked in IT MNC written recruitment exams and interview.
Explain the difference between echo and print statements?
How can you count the number of site visitors?
A simple way to make a chat page [...]

Pascal Language Sample Interview & Practice Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample Pascal Language Technical Interview Questions and Answers for fresher job interview / placement test. Pascal Language Practice Questions related to pascal asked in written recruitment exams and interview.
Why do we use Pascal?
How can we run gpc?
Give examples of Borland pascal products.
It is possible to do Dos and Windows programs on Delphi32?
Can Pascal programs be [...]

LISP Programming Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample LISP Programming Technical Interview Questions and Answers for fresher job interview / placement test. LISP Practice Questions related to lisp programming asked in written recruitment exams and interview.
Lisp programming.
How did Lisp originate?
Technique to call the lisp functions from other languages.
Implementation of lisp compilers and interpretation of lisp.
How does the output look like?
What can you [...]

ILU Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are a few basic interview questions related to ILU. More sample practice questions coming soon..
What is the the full form of ILU?
Describe ILU.
What do you understand by ILU?
You can publish your Questions in the Comments Field Below

HTML DOM Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample Technical Interview Questions related to HTML DOM, Written recruitment exam practice test questions about HTML DOM asked in IT Placement tests.
What is the relation between DOM and XML?
What do you understand by HTML DOM?
What do you understand by XML DOM?
Explain the difference between DOM and SAX.
Give the syntax of UI Object identifier used by [...]

HTML Language Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample HTML Language Technical Interview Questions and Answers for fresher job interview / placement test. Practice Questions related to HTML asked in written IT / web designer recruitment exams and interview.
What do you mean by HTML?
HTML code for a simple webpage.
What are the important steps of file handling in C language?
What is MARQUEE in HTML?
Use [...]

Fortran Language Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample Fortran Technical Interview Questions and Answers for fresher job interview / placement test. Practice Questions related to Fortran asked in written IT Coder / Programmer recruitment exams and interview.
List the various commands used in Fortran and their uses.
Are spaces required in equations?
What is the fortran equivalent to case statement in pascal?
What are the merits [...]

EJB Sample Interview & Practice Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample EJB Technical Interview Questions and Answers for freshers job interview / placement test. EJB Practice Questions related to EJB asked in written IT recruitment exams and interview.
Name the different types of enterprise beans?
Describe the Stateless session beans, stateful session, entity and message driven beans.
What do you understand by Entity beans.
What do understand by Session [...]

DHTML Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample DHTML Technical Interview Questions and Answers for fresher job interview / placement test. DHTML Practice Questions related to dhtml asked in IT MNC written recruitment exams and interview.
What do you understand by DHTML?
What technologies are used in DHTML?
How do we handle events in DHTML?
How does DHTML differ from HTML?
What is the difference in Fontsize [...]

CGI Sample Interview Practice Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

CGI Sample Technical Interview Questions and Answers for freshers job interview / placement test. Practice Questions related to CGI script asked in
written recruitment exams and interview.
Where is the use of CGI considered necessary?
What do you understand by CGI?
Explain the difference between object oriented programming and structured oriented programming?
Is it necessary to use Perl for this?
Is [...]

CCNA Interview Questions and Answers Part 2 of 2 – Cisco Networking Job Technical Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Cisco Test Papers, Technical Interview Questions

Sample Technical Interview Questions and Answers for CCNA Networking Job. Practice Questions related to Cisco asked in networking written recruitment exams and interview.
Go To CCNA Interview Sample Practice Questions Part 1 of 2
Go To CCNA Interview Sample Practice Questions Part 2 of 2
What is the access list range for extended IP Access list?
The access list [...]

CCNA Interview Questions and Answers Part 1 of 2 – Cisco Networking Job Technical Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Cisco Test Papers, Technical Interview Questions

Sample Technical Interview Questions and Answers for CCNA Networking Job for freshers interview / placement test. Practice Questions related to Cisco asked in networking written recruitment exams and interview.
Go To CCNA Interview Sample Practice Questions Part 1 of 2
Go To CCNA Interview Sample Practice Questions Part 2 of 2

How can find information about the IPX [...]

8086 Microprocessor Electronics Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some 8086 Microprocessor Sample Technical Interview Questions and Answers for Electronics / Instrumentation freshers job interview / placement test. Practice Questions related to asked in written electronics hardware recruitment exams and interview.
Name the various flags in 8086.
Describe the interrupts of 8086.
What do you understand by maskable and non maskable interrupts?
Name the interrupts used [...]

WAP Sample Technical Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample WAP Technical Interview Questions and Answers for freshers job interview / placement test. WAP Practice Questions related to asked in written IT MNC recruitment exams and interviews.
What is WAP?
What is WML?
What is WMLScript?
What are WAP Micro browsers and what are they used for?
Explain WAP with an example.
Explain a method for validation in WML.
How do [...]

W3C Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

W3C Sample Technical Interview Questions and Answers for freshers job
interview / placement test. W3C Practice Questions related to asked in written IT recruitment exams and interview.
Explain the W3C Standards.
What do you mean by the W3C DOM?
What is a web application?
Describe a WAR File.
What do you understand by W3C?
What are web services?
Define a web container.
Define a [...]

VBScript Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

VBScript Sample Technical Interview Questions and Answers for freshers job interview / placement test. VB Script Questions related to asked in written visual basic recruitment exams and interview.
Explain the difference between a Function and a Sub procedure.
What is VBScript.
How can you access the VBScript Documentation?
What are the advantages of VBScript Vs Javascript?
VBScript is supported by [...]

Javascript Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample Javascript Technical Interview Questions and Answers for freshers job interview / placement test. Javascript / Java Questions related to asked in written java script IT recruitment exams and interview.
What is Javascript?
Is there a way to hide the HTML source code from users?
How can we use javascript to submit an online form?
Where are the cookies [...]

CSS Sample Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Sample CSS Technical Interview Questions and Answers for freshers job
interview / placement test. CSS Web Design Questions related to asked in written IT recruitment exams and interview.
What do you understand by CSS?
What is the order of precedence – HTML Attributes or Css attributes?
How can you create you div 100% height?
What do you mean by property?
How [...]

8085 Microprocessor Electronics Interview Questions

June 30th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some Sample 8085 Microprocessor Technical Interview Questions and Answers for freshers job interview / placement test. Questions related to asked in written recruitment exams and interview for Electronics / Instrumentation engineers or diploma holders.
How many interrupts does a 8085 have?
What are hardware and software interrupts?
What do you understand by Tri state logic?
Which interrupt [...]

WinRunner Technical Interview Questions Part 2 of 2

June 26th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample WinRunner technical job interview questions asked in various IT companies Interviews, Placement papers, recruitment exams for freshers and experienced developers / coders.
This is the WinRunner Technical Interview Questions Part 2 of 2

Why don’t we prefer to load the GUI maps through start up scripts?
Extension of gui map file
What is the logical [...]

Winrunner Sample Interview Questions Part 1 of 2

June 26th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample WinRunner technical job interview questions asked in various IT companies Interviews, Placement papers, recruitment exams for freshers and experienced developers / coders.

Describe different loop commands in Winrunner.
Why do we use the GUI map configuration?
How can you determine the value of the variables while debugging?
Method to copy and move objects between GUI [...]

Apple Script Sample Interview Questions

June 26th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample Apple Script technical job interview questions asked in various IT companies Interviews, Placement papers, recruitment exams for freshers and experienced developers / coders

How will you copy from one script to another script using qtp

WHich are the default data types used in Apple script?

YOu may be asked to write some general scripts.

Can [...]

XSLT Sample Interview Questions

June 26th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample XSLT technical job interview questions asked in various IT companies Interviews, Placement papers, recruitment exams for freshers and experienced developers / coders

What do you understand by XSLT?

In XSLT, how do you use the <xsl:sort>element ?

How will you change an XML into an XHTML?

How can an XML be transformed into an XHTML?

Concept [...]

WMLScript Sample Interview Questions

June 26th, 2009 by Admin | No Comments | Filed in Technical Interview Questions

Here are some sample WMLScript technical job interview questions asked in various IT companies Interviews, Placement papers, recruitment exams for freshers and experienced developers / coders.

What is WMLScript.

Method of validation of user input in WMLScript.

Different Operators used in WML.

Different Flow control statements used in WMLScript.

Functions in WML.

How can the WMLScript be called from a WML [...]